产品中心

PRODUCT CENTER
产品详细
当前位置: 首页> 产品详细

    YHGZJ-W全气动灌装机

    产品简述:

    1536809125758051082.jpg


  • 详细介绍
YHGZJ-W全气动灌装机

Pneumatic Filling Machine

特点与优点:

  1本机采用进口机械部件,活塞和缸由不锈钢及聚四氟乙烯制成。优质卓越的进口元件与出色的机械设计,保证了其在国内同类机种中的绝对领先地位。

  2全新立式设计,轻巧方便。

  3手动及自动互相切换功能,当机器处于“自动”状态,机器按设定速度,自动进行连续灌装。而当机器处于“手动”状态,操作人员踩动踏进板,来实现灌装,若一直踩住不放,则也变为自动连续灌装的状态。料缸,三通部分采用快装式连接,拆装方便,无需任何特殊工具,因而清洗十分便捷。

  4防滴漏灌装系统灌装时气缸上下动作,带动闷头。气缸向下,则闷头向下,即阀门打开,开始灌装物料,气缸向上,则闷头向上,此时阀门关闭,停止灌装,并且杜绝滴漏与拉丝的发生。

Characteristics and advantages:

1. This machine adopts imported machine parts/piston and cylinder which made of stainless  steel and polytetrafluroethylene. Excellent qualified imported components and perfect  mechanical design ensure its leading position among domestic similar machines

2. The new vertical design, light and easy

3. Switch function between manual and automatic, when machine is under automatic condition, machine fills continuously automatically with set speed, when machine is under manual condition, operator steps on footplate  to realize Filling, if stepping on footboard all the time,  it will  change to automatic continuous filling condition.

Cylinder and three-way part adopt cuff connection which is easy to remove, it doesn’t need any special tools so it is easy to clean.

4. Anti-leaking filling system: during filling, cylinder moves up and down and drive end ring, when cylinder is downward, end ring is downward, then valve is open and start to fill material; when cylinder is upward, end ring is upward, then valve is close and stop to fill material and avoid leading and wire drawing.

技术参数Technical Specifications

型    号/model

灌装范围Filling Range

用气量 Air Consumption

净重 Net weight

YHGZJ-W-120

10-120ml

30L/min

22kg

YHGZJ-W-250

25-250ml

44L/min

25kg

YHGZJ-W-500

50-500ml

87L/min

28kg

YHGZJ-W-1000

100-1000ml

160L/min

36kg

YHGZJ-W-2500

250-2500ml

300L/min

60kg

YHGZJ-W-5000

500-5000ml

450L/min

75kg